8 Drawer Dresser Espresso
8 in. x 24 in. Espresso Deluxe Drawer Kit is rated 3.6 out of 5 by 70.
Rated 2 out of 5 by Ryan from Why the template??? I purchased a number of these drawers for use in the 4' - 8' starter closet kit. Overall the product is perfectly fine, but it wasn't until I found that one needs to use a cheap paper template you must first cut out, then locate perfectly, and then pre-drill the holes that are used for the mounting rails along the side of the drawer. Considering there are about 3, 000 pre-drilled holes found throughout both the closet frame and other parts of the drawers, why on earth would the manufacturer decide to not pre-drill these four holes??? It only impacts how straight and aligned they appear, so if you're off even a 1/64" on any drawer, they will look terrible. Since they stack, each drawer's template must be perfectly located, holes must be pre-drilled by you, and then the rails must be then attached exactly. I'm reasonably handy and needed to adjust the drawer locations multiple times. If the holes came pre-drilled (like aaaallllllll the other thousands of holes), it would be fine. Unless you're very confident in your abilities, look for another product. I wish I had, but by the time I discovered this, I was in too deep and was too late for me.Rated 1 out of 5 by Matthew from Purchased 4 drawer system. 3 out of the 4 drawers had broken seams. Basically, all 4 sides of the... Purchased 4 drawer system. 3 out of the 4 drawers had broken seams. Basically, all 4 sides of the drawer lay flat (in one piece), then require wood glue, and then finally need to wrap around the drawer bottom with dowel pins at one corner. 3 drawers received in the kit were all broken and the drawer sides were in 4 separate pieces. Needed extra wood glue and several clamps to assemble. Poor design and not the easiest to assemble. However, the drawer front and the pull are top quality and nicely designed. Rated 5 out of 5 by Lisa from Looks Amazing! We purchased and built this closet organizer over the weekend. We used 8 drawers. As the holes were not pre-drilled, we created our own template using the paper ones, cutting out a strip in wood, that we sat on the bottom edge of the drawer. Then put the slider part next to the wood. This helped hold it in place as well. It went really fast after that. Rated 5 out of 5 by jessie from Perfect size drawer This system was uber easy to install. The closet system hangs from a track. It was just a matter of finding the studs in the wall and making sure I drilled into studs. It also came with a few heavy weigh anchors. I used those were the studs were further apart. The drawers were so easy to assemble! This is the perfect size for a drawer. Rated 1 out of 5 by Nicki from Terrible These drawers don't have anything pre-drilled for the sliding tracks. You have to use a paper template. This created room for error and now the drawers do not hang evenly. And you have to build every part of the drawer, it took hours!! Rated 1 out of 5 by metalfd from Cheap junk Very shabby cheaply made and it comes in a million boxes and pieces. Also sent wrong item twice Rated 2 out of 5 by Mike from To put it simple they were bad. You have to use templets and there was not enough glue. To put it simple they were bad. You have to use templets and there was not enough glue. Rated 5 out of 5 by Homefixerupper from super easy
- Top 15 richcopy alternative and similar softwares.