Coffee table legs Home Depot
Folding Banquet Table Legs (2-Pack) is rated 3.2 out of 5 by 72.
Rated 1 out of 5 by PawPaw from Total junk. Purchased two sets of these folding table legs, made in China.All parts were there but the upper vertical tubes were not aligned before they were welded on any of the four assemblies. Also the holes for the brackets that fasten to the underside of the table top are so far out of square that any attempt to fold and unfold the legs would rapidly break the cheap rivets that attach the table brackets to the folding mechanism.They appear to have been drilled and assembled without the aid of any sort or jig.I hope these are not simply put back in stock, they belong in a dumpster.Hard to believe that Home Depot would sell something of this poor quality.Rated 4 out of 5 by Tmatahead from I found a kitchen island countertop set out with some trash. The island measured 30x54. these le... I found a kitchen island countertop set out with some trash. The island measured 30x54. these legs worked perfect to create a portable workbench. The legs lock in both open & closed position so that a clamp isn't needed in order for the legs to remain closed. I have a "Lifetime Products" 24x48 folding table, I like this table much better. It feels so much stronger, though both are rated at 400lbs. I need to keep my eyes out for another island top. Remember when mounting the legs on a short surface to offset the legs slightly so that when closing the legs they don't interfere with each other. I only wish the legs were longer. Rated 2 out of 5 by WeekendWarrior803 from Light-weight Folding Banquet Table Legs The gauge of the tubing used for these legs is very light. It causes the table to wobble. If your table is only going to be used for light loads (eg Rigatoni) it should be OK. If your table is going to be used for a work station you will probably want to purchase a heavier gauge set of legs. Rated 5 out of 5 by Pat from Used these on our old counter top and now we have another table to use. Used these on our old counter top and now we have another table to use. Rated 3 out of 5 by Mark2 from These work, but could be more stable I purchased these so that I could make a table from an existing laminate top. I added some fill strips to the bottom of the table top to ensure that the leg supports would have a strong base. It does support the top and the legs do fold. However, erect, the table will move slightly from side to side. The mass of the table contributes to the instability, but it is obvious that the leg supports should be stronger to prevent the swaying. I plan on adding a removable lateral support to enhance the stability. The legs are easy to install, but if you are expecting a solid free standing table following installation you may be disappointed. Rated 1 out of 5 by jaylafala from this is literally the worst product on earth I am not exaggerating when I say I have never bought a worse product. I don't mean just hardware, I mean in general. Nothing works about this. All the metal is crooked. The holes are mis-aligned so you can't put screws through. The moving parts are so stiff I can't move them with my hands. I have to use a mallet. That's right guy, a mallet. Do not reccomend this product to anyone except your morrtal enemies. Rated 5 out of 5 by Padraig from Quick table maker We needed to make a big table quickly for a family gathering, and these fit the bill. All the parts were present, and all the holes lined up nicely. In less than 15 minutes I had a nice folding table made from an old plank top (3'x6') that had no legs. We used to use saw horses, but they were a pain in the neck. After a 3-day weekend of use, being folded after each meal, it seems to be holding up well. Rated 1 out of 5 by Dboe from Not the same I bought these legs years ago and they still hold up great! bought these a few weeks ago, thinking they were the same... NOT !! now it's a 2 piece design the U shape feet bolt on to the upper folding section, very thin metal, can't see these holding up for very long! will return this week !!